万克宝 钢管柄 羊角锤 12oz Wankebao Steel Pipe Handle Claw Hammer

$6.55

万克宝 钢管柄 羊角锤 12oz/1把[12oz]

1:高碳钢锻打锤头,硬度高。

2:锤头结合部特殊钢圈加固。

Wankebao Steel Pipe Handle Claw Hammer 12oz/1 [12oz]
1: High carbon steel forged hammer head with high hardness.

2: The special joint of the hammer joint is reinforced.

规格 12oz

Specifications 12oz

57 in stock

Compare

Description

世达木柄羊角锤0.8磅
锤子用于敲击或锤打物体的手工工具。锤由锤头和握持手柄两部分组成。①锤头:材质有钢、铜、铅、塑料、木头、橡胶等。结构有实心固定式、锤击面可换式和填弹式。实心固定式锤头使用最广。锤击面可换式锤头的两个敲击面可卸可换,可以换配各种材质和硬度的锤击面,故敲击范围很大。填弹式锤头内装有钢丸或铅粒,使用时可消除反弹,又称无反弹锤。反弹的消除,可显著地降低操作者的疲劳感。钢锤锤头的一端或两端的锤击面均经过充分的热处理,具有很强的坚硬性;中段一般不经热处理,具有良好的弹韧性,在锤击过程中能起缓冲作用以防止锤头爆裂。锤头的中心处开有孔洞,以便安装手柄。②手柄:有木柄、钢柄和以玻璃纤维制作的塑料柄等。木柄多用胡桃木、槐木等硬质木材制成,弹韧性好,但易受气候影响,伸缩性大,逐渐为后两种材质的锤柄所取代。
而羊角锤是木工专用的手锤。一般羊角锤的一头是圆的,一头扁平向下弯曲并且开V口。除用于敲击普遍非淬硬的铁钉,还可通过另一端的羊角状双爪卡紧并起拔铁钉,或撬裂、拆毁木制构件。

Shida wooden handle claw hammer 0.8 lbs
A hand tool used to strike or hammer an object. The hammer consists of a hammer and a handle. 1 Hammer: The material is steel, copper, lead, plastic, wood, rubber, etc. The structure is solid fixed, hammer face replaceable and filled. Solid fixed hammers are the most widely used. The hammering surface of the replaceable hammer head can be unloaded and exchanged, and can be replaced with a hammering surface of various materials and hardness, so the tapping range is large. The ball-filled hammer head is equipped with steel shot or lead pellets, which can eliminate the rebound when used. It is also called no rebound hammer. The elimination of the rebound can significantly reduce the operator’s fatigue. The hammering surface of one or both ends of the steel hammer hammer is fully heat treated and has strong rigidity; the middle section is generally not heat treated, has good elastic toughness, and can act as a buffer during hammering to prevent the hammerhead. burst. A hole is formed in the center of the hammer to mount the handle. 2 handles: wooden handle, steel handle and plastic handle made of fiberglass. The wooden handle is made of hard wood such as walnut or eucalyptus, which has good toughness, but is susceptible to weather and has large flexibility. It is gradually replaced by hammer handles of the latter two materials.
The claw hammer is a hand hammer for woodworking. Generally, one end of a claw hammer is round, and one end is bent flat downward and opens a V port. In addition to tapping the generally non-hardened nails, the claws can be clamped and pulled out at the other end, or the wooden members can be split and demolished.

Leave a Reply

Your email address will not be published. Required fields are marked *

X