捷科管子割刀PPC-42 Jieke pipe cutter PPC-42

$6.56

500 in stock

Compare
SKU: 673874 Categories: , ,

Description

捷科管子割刀PPC-42

Jieke pipe cutter PPC-42

材料采用60Cr-V铬钒钢,强度高韧性好表面采用镀铬处理,防锈能力强

管子割刀一般使用去PVC PP-R 等塑管材料的剪切工具 一般刀体材质采用铝合金 使得使用轻巧, 刀片有65MN 不锈铁 SK5 等 硬度在48-58度之间 刀片采用高温淬火 ,一般手动工具都是消耗用品,质量较好的使用寿命在1-3年之间。
使用步骤
1选择适合管子尺寸的RIDGID割刀,管子外径不能超出对应割刀的切割范围;
2切割时先在需要切割的长度做好标记;
3然后将管子放入刀架并且标记对准刀片,下压手柄直到刀片挤压住管子且保证刀片和管子呈90度;
4一手握住管子一手下压割刀手柄利用杠杆原理对管子进行挤压式切割直至切割完成;
5切割完后切口整洁无明显毛刺。

Pipe cutters generally use shearing tools such as PVC PP-R and other plastic pipe materials. The general tool body material is made of aluminum alloy, which makes it light and lightweight. The blade has 65MN stainless steel, such as stainless steel, and the hardness of the blade is 48-58 degrees. General hand tools are consumables, and the good quality service life is between 1-3 years.
Steps for usage
1 Select the RIDGID cutter suitable for the pipe size, the outer diameter of the pipe should not exceed the cutting range of the corresponding cutter;
2 When cutting, mark the length that needs to be cut first;
3 Then place the tube into the tool holder and mark the alignment blade, press the handle down until the blade squeezes the tube and the blade and tube are 90 degrees;
4 holding the tube with one hand and pressing the cutter handle with a lever principle to squeeze the tube until the cutting is completed;
5 After the cutting, the incision is neat and clear without obvious burrs.

Leave a Reply

Your email address will not be published. Required fields are marked *

X